Close
Page 1 of 3 123 LastLast
Results 1 to 10 of 21
  1. #1
    Premium member Sawdonkey's Avatar
    Join Date
    Oct 2012
    Location
    Wicker Park
    Posts
    2,319
    Post Thanks / Like
    Mentioned
    64 Post(s)
    Tagged
    0 Thread(s)

    Sawdonkey’s 210 Build #2

    It’s finally happening. My condo is rebuilt and I moved back in. I’ve ordered a new 210 gallon tank, a glass holes overflow kit, a 40 breeder for a sump, and a custom acrylic baffle kit.

    Over the weekend, I rebuilt my old stand and fixed the things that always bothered me. I put two thick coats of flex seal on the lower part of the stand, so if anything ever leaks, it will hold about 20 gallons better than a kiddie pool and will keep my new hard wood floors safe.

    Here’s my old tank that’s been running in this condition for more than six months. No filtration, only one water change. Somehow there are a still a couple of SPS alive and of course, my two triggers are still in there.

    Here’s the stand after putting one coat of white on it. One more coat and then I fix the walnut veneer. I’m then going to sand and re-finish the whole walnut stand and canopy.



    This is where it go, same place as before:

  2. Likes ultimatemj, Fish_wiz2, beetlenut33 liked this post
  3. #2
    Premium member
    Join Date
    Aug 2017
    Location
    Streamwood
    Posts
    609
    Post Thanks / Like
    Mentioned
    6 Post(s)
    Tagged
    0 Thread(s)
    Woohoo glad you are back running.

    Sent from my SM-N950U using Tapatalk

  4. #3
    Senior Member Mjl714's Avatar
    Join Date
    Nov 2015
    Location
    Naperville
    Posts
    814
    Post Thanks / Like
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)
    Awesome. Who did you go with for your new tank?

  5. #4
    Premium member Sawdonkey's Avatar
    Join Date
    Oct 2012
    Location
    Wicker Park
    Posts
    2,319
    Post Thanks / Like
    Mentioned
    64 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Mjl714 View Post
    Awesome. Who did you go with for your new tank?
    Just got a standard 210 marineland with no overflows. Drilling for GlassHoles overflow box. Thought about going with a 180 to get rid of the height, but it was actually significantly more than the 210.

    I’m getting the tank from a guy I know that has wholesale hookup.

  6. Likes Mjl714, jayjigga liked this post
  7. #5
    Senior Member Mjl714's Avatar
    Join Date
    Nov 2015
    Location
    Naperville
    Posts
    814
    Post Thanks / Like
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)
    Good to hear the Clown and Niger Triggers survived.

  8. #6
    Senior Member tinman's Avatar
    Join Date
    Jan 2012
    Location
    chicago
    Posts
    6,702
    Post Thanks / Like
    Mentioned
    76 Post(s)
    Tagged
    1 Thread(s)
    Dumbest of all is always the one that thinks he is smarter than everyone ..

    Dont be a smartass
    all you get from me is :thefinger:

  9. #7
    Senior Member Mjl714's Avatar
    Join Date
    Nov 2015
    Location
    Naperville
    Posts
    814
    Post Thanks / Like
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)
    I like the glassholes idea, what’s the plan for the return(s)?

  10. #8
    Premium member Sawdonkey's Avatar
    Join Date
    Oct 2012
    Location
    Wicker Park
    Posts
    2,319
    Post Thanks / Like
    Mentioned
    64 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Mjl714 View Post
    I like the glassholes idea, what’s the plan for the return(s)?
    I’ll drill for the return too. I got that kit from Glass holes too. I’ll reuse my echotech return pump. It’s the smaller one, I forget the name. I don’t like having a ton of water going through my sump, so I don’t even run it half power. A lot of people would say it’s too small of a pump for this size tank, but I see no point in pushing tons of water through my sump.

  11. Likes Mjl714 liked this post
  12. #9
    Senior Member Mjl714's Avatar
    Join Date
    Nov 2015
    Location
    Naperville
    Posts
    814
    Post Thanks / Like
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)
    I’ll be following, I’m considering similar with a 125g.

  13. #10
    Premium member Sawdonkey's Avatar
    Join Date
    Oct 2012
    Location
    Wicker Park
    Posts
    2,319
    Post Thanks / Like
    Mentioned
    64 Post(s)
    Tagged
    0 Thread(s)
    Baffles. Nice and neat with masking tape on the silicon. Still a couple more to put in. My sump will be a lot tighter with going to a 40B from a 75. However, I’ll have so much more space under my stand.


  14. Likes Mjl714, Cubano32 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •