Funlad3's 45 Gallon 3' x 2' x 1' Acropora Lagoon

Funlad3

Well-known member
Hi all! I've been madly bored while everything is shut down to mitigate the pandemic, so I finally gave in and decided to set up a build for some random acros. I used to sell commercially years ago back in highschool, and I haven't had a proper tank to grow things out in since. I'm a huge wild Acropora collector, so this tank should fill in quickly. The plan is to grow out frags/chunks from different colonies and see what I can turn them into alongside some old classics. The other gimmick that I'm sticking with for this build is that I'm trying to scavenge/repair/recycle as much equipment as possible. Thankfully, I have plenty of old equipment sitting around, but I've already got to meet with other local reefers and had to dig around on Craigslist for other materials.

Here are some specs of what this build will include!

3' x 2' x 1' Shallow Lagoon Peninsula
Custom T5/LED Lights
Two Maxpect Gyre XF250
50ish Pounds of Pukani
40 Breeder Sump
Ecotech Vectra M1
Reef Octopus 150 NWB Skimmer
Neptune Apex Classic
Ancient Geo's Reef (I think?) Calcium Reactor with Milwaukee Regulator

So here's where things get fun. I've been building tanks for years, but my long-time reefing buddy @kerber13 convinced me to try to cut my own glass for a small desktop build. Small is boring and I had some glass laying around, so I decided to cut apart some tanks that I had laying around, which was moderately successful? I broke some tanks, and I was lucky enough to have some local reefers bail me out with extra tanks (thanks, @Reefaholic ). I used 40 Breeders for the 36" long panels and a 20 Long for the 24" long panels. Cutting 1/4" glass is easy when it decides to break where it's supposed to. That doesn't always happen.

A sacrificial 40 Breeder:


Cutting apart the rim:


Rimless (right before I tore the panels apart):


Cutting a 36" long strip of 4" wide glass from my 36" x 16" 40 Breeder panels didn't go well and left jagged edges on my 36" x 12" peninsula panels:


Two 30" x 12" panels from a 20 Gallon that I tore apart:


Cutting 6" off of the 30" panel to get to my 24"x12" side panel:


I ground the few jagged edges on my 36" panels and clamped my four sides together. The grinding isn't perfect, but it's good enough.


I also drilled some holes for the plumbing on the 20" back panel. The 1.5" hole is for the overflow box. There are two 3/4" drain holes.


I took the tank apart and taped up all of the edges so that I can silicone it nice and cleanly! I'm using the injection method of building this tank, which is why the taping is 1/4" off on the sides of the short panels (pictured):


So! At this point, the tank was all taped up and I was using 90º clamps to hold the panels in place, so I decided to do some dry scaping with my rock. A friend is getting to ready to move out of town, so I snagged a bunch of bleached/cleaned Pukani rock for dirt cheap. Here's what I had to work with:


And this is what I ended up with. Top view:


Front left:


Front right:


Right side:


Front:


Left (there's more room between the rock and the glass than the picture shows; the extra-wide painter's tape hides the gap)


This tank is only 12" deep (11 3/4" when I finally get the bottom panel), so I wanted to keep the rockwork low so that my acros have room to grow vertically. Here's a rim-level side profile showing how I did. The tallest point of the scape is exactly 3" below the rim. After I subtract for the bottom panel and water level, I'll still have about 2" of water from the absolute top of the rocks and closer to 6" throughout the rest of the tank.


For the sump, I was going to build a custom 30"x18"x14" tank and throw in baffles and a sock holder, but I'm thoroughly tired of taking tanks apart. I caved and bought a 40 Breeder (after I destroyed two of them getting the glass for the DT. Oops). I'm going to use some scrap glass as a lid for the drain/filter sock chamber, and I have oversized skimmer and return chambers. I had the Reef Octopus and Vectra sitting around from my 24G nano build from two years ago, and I can always use even larger equipment with this sump in the future.


Putting in an 8" bubble trap:


Putting in two baffles for my filter sock holder. I'm going to cut the holder itself from some acrylic that should be arriving later today:


For lights, I have a super old 48x3W LED board that I originally ordered back in 2011ish. Two years ago, I cut it in half to fit into my Nanocube hood. Now I'm going to lay the two halves of the board into the middle of a custom hybrid fixture, but first I have to replace some of the broken LEDs. Luckily, I found some replacement diodes for $0.80 apiece on Amazon.


For the T5 part, I had an old 4x39W retrofit kit left over from my old growout tank that I took down in 2014. I managed to ruin the reflectors, so I got a 4' Aquaticlife T5 fixture from @((FORDTECH)) that I gutted for the reflectors and fans. I'm going to cut the center channel in half and end up with two 36" T5s on either side of my rebuilt LEDs. Check out this wild three-piece four bulb reflector:



That's where I'm at for today. I ordered the bottom tank panel from a glass shop because I couldn't find any 36" x 24" glass locally, and that should be done by the weekend. Once it is, I can silicone the tank together and let it sit for a few days before I leak test it. In the mean time, I need to build a stand and canopy, cut my filter sock holder, and get my lights put together. With any luck, I can get this tank fully up and running by next weekend. I already have my eye on some nice Aussie colonies and I have a store owner tracking me down some fish; this should all progress quickly. I'll leave you all with a picture of my old nano before from before it crashed out. Too many corals, not enough water volume.


(Also I swear the next round of posts will have better photo quality. I just realized that the forum isn't running vBulletin anymore and I guess I have to stop hosting my photos on Facebook. I used Blogger for this post, and the compression is wild.)
 
Last edited:

Smitty

Premium member
Wow, you have really done a great job thus far. I can't wait to see the finished product. Good job.

Sent from my SM-N920P using Tapatalk
 

Funlad3

Well-known member
I got a call this afternoon that my bottom glass panel was cut and ready at the glass shop, so I ran out to pick it up as well as some materials for my stand! I wanted to put the tank together on a level surface, and it was a great opportunity to throw a first version of the stand together. I made it as large as I could with the materials that I bought with the knowledge that I can always cut it smaller. I definitely want to leave a ledge running along all sides of the tank, but I'm not going to stick with the 6" that I currently have. Once I play around with placing the tank on the stand some more, I'll have a better idea of how much I want to cut it down by. For now, here's what I got done today!

Stand materials from the Home Depot and a 3'x2' piece of sheet metal for my custom canopy:
IMG_1227.jpeg

I decided to get fancy and use the table saw to cut special joints in my 4x4s. Now I can have my 2x4s sitting upright on the vertical supports, which should save me from needing additional bracing. And it was fun:
IMG_1228.jpeg

The stand, version 1.0. Right now, it has a 4' x 3' footprint, which I'm definitely going to make smaller. The 30" height is perfect, though:
IMG_1233.jpeg

The glass panels, cleaned, taped, clamped and ready to go. They're sitting on a yoga mat so that everything lays perfectly flat and level, even if the nearly 3/4" plywood is bowed (it somehow was):
IMG_1238.jpeg

Here's a closeup on the edges. I taped them so that there's always an extra 1/8" of silicone on each glass panel. Each panel is also 1/8" away from the edge of the next panel so that there's a gap to extrude the silicone into. This gap is maintained by silicone rubber spacers that are super glued onto the edges of each panel:
IMG_1239.jpeg

IMG_1240.jpeg

And then there was silicone! Removing the tape and extra silicone got a little messy, but everything should clean up nicely once it cures and I can get at stray silicone with a razor blade. For now, the seams look smooth and air bubble free:IMG_1241.jpeg

Finally, I took the sump down from the counter and dropped the equipment back inside. There's definitely room for more/larger gear if I want it:
IMG_1243.jpeg

Tomorrow, I'm going to start working my acrylic that I got in the mail today. I still need to cut my filter sock holder for the sump, and I'm also working on an overflow box. Once I get all of the wet equipment built, I can move onto my lights and canopy. For now, the priority is to get the system wet and running so that I can get some acros growing! One day at a time.
 

Funlad3

Well-known member
Today was pretty uneventful; I just cleaned up the tank some and cut up a bunch of acrylic!

Here's the tank looking *clean* from the right:
4160

From the front:
IMG_1247.jpeg

From the left:
IMG_1248.jpeg

I did a few things with acrylic today. I cut the panel that I'm going to make into my filter sock holder. I'm going to cut the holes tomorrow, but look at how well it fits between the panels. I also had the idea to put four small pieces of glass on the vertical panels the sock holder will sit between so that it has something to rest on for extra support. It fits *perfectly*. I'm very happy:IMG_1249.jpeg

IMG_1250.jpeg

And then I cut a bunch of acrylic for a custom low-profile overflow. My friend @kerber13 was nice enough to give me an extra Eshopps Eclipse M that just needed a new bulkhead, but it only has two drains in the back chamber. Instead of cutting it apart to replace the bulkhead and still being stuck with two drains on the overflow box, I decided that I would build my own 12" long overflow box with three 1" drains outside the tank so that I could run a Bean Animal system. I still need to get the big 1.5" bulkhead so that I can build the boxes and attach them to the tank, but at least I got the acrylic cut. I also need overflow teeth, but I have something in the works for that as well.

Overflow parts:
IMG_1251.jpeg

Internal and external overflow boxes:
IMG_1252.jpeg

The internal box, missing exactly 2.25" of acrylic. This is where my overflow teeth assembly is going to go once I get it built:
IMG_1253.jpeg

And here's the external overflow box, which I also cut a lid for! I'll have plenty of room for all three of the drains that I want:
IMG_1255.jpeg

We'll see what I can get done tomorrow; I'm running out of things to do on the watery side of this build, so I foresee some canopy work this weekend.

Happy Friday, all!
 

xmoji

Eat, Sleep, Reef
Thanks, man! I'm going to need to hit you up for some of those sticks from Seven Seas in a couple of weeks, and I'll be looking for some other old-school pieces too. I'm *excited*!
Of course! I’m very impressed with all this custom work you’re doing on the tank. Can’t wait to see this one progress.
 

amirk48

Member
looks great!
im about to start a similar project only i want to go 2' X 2'.
are you happy with the 30" height of the stand considering the tank is only 12"?

good luck!
 

Funlad3

Well-known member
looks great!
im about to start a similar project only i want to go 2' X 2'.
are you happy with the 30" height of the stand considering the tank is only 12"?

good luck!
The 30" stand is perfect if you want to look from the top down. If you want to look in through the sides more, you might want something a little taller, but I can definitely still see into the tank at this height through the glass without issue. It all depends on what you're going to be looking at more.
 

Funlad3

Well-known member
I made more progress today! I got all of my bulkheads and loc-line ordered along with some other odds and end, so I should be able to get this tank water tested by Wednesday. With any luck, I'll have the stand and canopy done by then. I just about finished my acrylic work for the day by drilling holes in the filter sock holder and the holes to connect my internal overflow box to the external box. I also managed to pick up even more equipment that I didn't need to upgrade something I hadn't even built yet. Onto pictures.

The filter sock holder is cut! I freehanded a 4" hole template and then routed it into my 6" wide piece of acrylic. The edges aren't perfect, but the filter sock fits *snugly*, so I'm happy:
IMG_1257 2.jpeg

Then I peeled off the protective wrap and siliconed it in place. I promptly gouged the top of it with a razor blade trying to clean up some excess silicone, but so it goes. I used "Fluorescent Blue" acrylic from McMaster-Carr because I like the blue tint, and it's also cheaper than regular clear acrylic:
IMG_1263 2.jpeg

IMG_1264 2.jpeg

Then I drilled the hole for the 1.5" bulkhead that's going to join my internal and external overflow box. It took me forever to measure the spot so that the top of the overflow will sit just below the top edge of the tank. If the future teeth get clogged, the water will just pour over the top of the overflow and into the drains in the back instead of over the top of the tank and onto the floor:

IMG_1258 2.jpeg

I cut the internal and external panel at the same time, and the holes' edges are *CLEAN*:
IMG_1260 2.jpeg

Finally, I cut the holes for my 1" Bean Animal drain. Of course, my template slid on the first hole, but there's still enough room for all of the bulkheads. I'll survive the imperfection.
IMG_1261 2.jpeg

The overflows are all laid out and ready for solvent glue! I should get it in the mail in the next few days, and my overflow teeth should be in by then too:
IMG_1271 2.jpeg

And now for the purchase I didn't need. Now I *could* have replaced the dead LEDs on my 48x3W LED board and would have had enough light for this tank. But my buddy who's moving his tank decided that he wants to do halides, so I picked up these Chinese black box LEDs for super cheap. When in doubt, double your light.
IMG_1266 2.jpeg

I actually really love these boards, and they're going to be super easy to rivet to the piece of sheet metal that I'm going to use to separate my T5s and LEDs from the ballasts/drivers/switches in the canopy. I'm going to order more thermal paste to help take care of the heat transfer and keep these boards nice and cool:
IMG_1268 2.JPG

Here are both of the gutted fixtures. Outside of the different brands of fans from the identical fixtures, all of the lenses being glued on one of the two fixtures, and the LED drivers being secured in different ways between the two fixtures, I'm actually pleasantly surprised by the build quality. All of the quick connects should make wiring up my lighting very straight forward:
IMG_1273 2.jpeg

That's all for today! Tomorrow, I'm going to try to get the lid cut for the overflow section of the sump and get some more work done on the canopy and the stand. I'm stuck on water testing/plumbing until my bulkheads get here on Wednesday, but I should be able to have pretty much everything else ready to go by then.

Happy weekend!
 

Funlad3

Well-known member
Today I picked up 80 pounds of CarribSea Special Grade Reef Sand, even though I'll probably only need half of it. I also got some work done on the custom lighting.

I got the LED boards ready for mounting on my sheet metal. I drilled holes where I'm going to need rivets, and I also cut some holes so that my wire leads can push straight through to the backside of the sheet metal. I'm waiting on some thermal paste to sandwich between the back of the LED boards and the sheet metal, but then I'll be able to rivet them into place:
IMG_1284.jpeg

Then I cut down my 4' T5 Reflectors by 1' so that they'll fit over this tank:
IMG_1279.jpeg

Finally, I got the reflectors measured out and riveted in place:
IMG_1287.jpg

I have a bunch of little electrical parts coming over the next few days, so I should hopefully be able to wire everything up shortly. The Acrylic glue should come tomorrow, so I should get pretty close to finishing the overflow boxes as well. This build is getting close!
 

Funlad3

Well-known member
Today I finally got my drain cover drilled for my sump. I still have to silicone the drain cover in place, but I'm waiting for my bulkheads to come in the mail before I do:
IMG_1295.jpeg

And here's the sump with the filter sock cover removed.
IMG_1296.jpeg

I got my acrylic solvent/glue in the mail today, so I was finally able to glue up the external overflow box. I'm still going to run it over a flush bit on my router to clean up all of the edges:
IMG_1298.jpeg

I also got my thermal paste in the mail! I marked out the location of each LED on the circuit boards and put thermal paste on the sheet metal board to aid in heat transfer:
IMG_1300.jpeg

And to wrap up the day, I got the LED boards riveted to the sheet metal. Tomorrow, I'm going to build the canopy around it and do some stand work while it's nice outside. I'm *very* happy with how the lighting is turning out (save for the loose lens that fell; I have to reglue it):
IMG_1301.jpeg
 

Funlad3

Well-known member
Nice work on this! No heat sink on the LEDs?
Nope! The black boxes I pulled them from didn't have any to begin with, and the thermal paste on the back of the boards should help to channel the heat into the sheet metal, which will be extensively cooled by fans on the back.
 

Funlad3

Well-known member
I took advantage of the nice weather today and got the tank painted! I used a black enamel spray paint, and it came out great:
IMG_1311.jpeg

Here's what it looked like tonight once it had a chance to dry. I definitely need to clean up some of the other panels, because I definitely didn't use enough tape and paint dust got everywhere:
IMG_1312.jpeg

The most time consuming and frustrating part of this build so far was definitely getting the T5 endcaps mounted to the sheet metal. I didn't realize that they sell brackets to make this ten times simpler and fought for about three hours to get the eight end caps riveted into place. If I need to replace any caps in the future, I can just drill out and replace the rivet, but for now, I don't even want to think about that. One of the bulbs is slightly out of alignment from the others, but I'm past the point of caring about it:
IMG_1315.jpeg

With all of the lighting finally attached to my sheet metal, I got to put it inside of the 9" tall wooden canopy that I ripped on the table saw this afternoon. This was me checking that it fit and definitely not breaking a T5 bulb on the ground:
IMG_1316.jpeg

After some trimming around the edges of the sheet metal, I got to mount the whole lighting board 3" from the top of the canopy with some more rivets and some L brackets. I now have 6" of canopy below the light board to keep glare and stray light around the tank to a minimum and still leave me enough room in the top section to get my wiring done and put plenty of fans:IMG_1321.jpeg

Mounted:
IMG_1319.jpeg

Glamour shot:
IMG_1320.jpeg

The bulkheads that I've been waiting for should be arriving later today, so my plan is to finish resizing the stand and to run a water test with both pieces of the overflow box on the tank. It's going to be 90º and humid out, so I'm not looking forward to all of the cabinet work, but at least I'll be able to get the tank wet.
 

Sawdonkey

Premium member
This is a cool build. Why did you choose to use the PCB board from black boxes and not just use the whole black box? What does deconstructing it do for you?
 
Top