A Look Back at 2012's Best Sellers

[MarineDepot]

A Look Back at 2012's Best Sellers
Sale ends 1/28/13; The BIG Deal ends 1/18/13



We have a total of 59 items on sale today. See them all >>

MORE MARINEDEPOT.COM NEWS

• Giveaway: Enter the PURE Marine Challenge!
• January 2013 Featured Tank: Shaun's 34-Gallon SPS and Clam Solana
• Week in Review: 1/7/13 (aquarium sales and search trends)
• eBook: Download '100 Tips for a Successful Aquarium' for 99¢
• Tom Aquatics Aqua-Lifter Dosing Pump Product Demo
• New Year, New Gear Sales Event

 

[Jep21]

Was planning on getting this.. Was wondering does this come with pump and plumbing or are they separate..

http://www.marinedepot.com/Two_Litt...s-Two_Little_Fishies-TL43111-FIFRISBP-vi.html

 

[MarineDepot]

Was planning on getting this.. Was wondering does this come with pump and plumbing or are they separate..

http://www.marinedepot.com/Two_Litt...s-Two_Little_Fishies-TL43111-FIFRISBP-vi.html

Hi, jeppun21. You'll still need tubing, hose clamps (recommended) and a pump. Let us know if you'd like some suggestions.

 

[Jep21]

Hi, jeppun21. You'll still need tubing, hose clamps (recommended) and a pump. Let us know if you'd like some suggestions.

Was wondering do u guys sell the tubing and hose clamps and would a mj 400 work on it..

 

[MarineDepot]

Was wondering do u guys sell the tubing and hose clamps and would a mj 400 work on it..

The MJ400 is a bit underrated for BioPellets because they require higher flow rates. You would be better off using a Maxi-Jet 1200 Pump or another pump rated 300-400 GPH. Here's a link to hose clamps and flexible vinyl tubing as well.

 

[Jep21]

The MJ400 is a bit underrated for BioPellets because they require higher flow rates. You would be better off using a Maxi-Jet 1200 Pump or another pump rated 300-400 GPH. Here's a link to hose clamps and flexible vinyl tubing as well.

Whats ur recomendations on plumping.. Im gonna be putting this on my biocube 29..

 

[MarineDepot]

Whats ur recomendations on plumping.. Im gonna be putting this on my biocube 29..

It is best to pull raw water directly from the aquarium. Then, return the water next to your protein skimmer so it can remove bio-film from the water before going back into your aquarium.

In a BioCube, we would recommend submersing the water pump in the back overflow chamber and run the tubing from the pump into the reactor. Then place the return water line, coming from the reactor, next to the protein skimmer pump so it can draw the return water into the protein skimmer before going back into the display aquarium.

If we're not explaining this thoroughly in writing, you're welcome to contact us toll-free at the 800 number below. We're open till 6 pm PST tonight. Saturday we're open 8 am to 4 pm PST.

 

[Jep21]

It is best to pull raw water directly from the aquarium. Then, return the water next to your protein skimmer so it can remove bio-film from the water before going back into your aquarium.

In a BioCube, we would recommend submersing the water pump in the back overflow chamber and run the tubing from the pump into the reactor. Then place the return water line, coming from the reactor, next to the protein skimmer pump so it can draw the return water into the protein skimmer before going back into the display aquarium.

If we're not explaining this thoroughly in writing, you're welcome to contact us toll-free at the 800 number below. We're open till 6 pm PST tonight. Saturday we're open 8 am to 4 pm PST.

Actually u explained it quite well.. Thank u so much for all ur help

 

[MarineDepot]

Actually u explained it quite well.. Thank u so much for all ur help

No sweat! Good luck with installation. Feel free to follow up if you have have additional questions. We don't typically monitor message boards over the weekend, but you can contact us directly or leave a comment here and we'll follow up on Monday. Happy reefing!