Phospate Hanna Checker

DB9181

New member
So I know that Hanna Checkers are suppose to be substantially better, but yesterday I got two very different readings from my tank 0.33 & 0.24 (yes... i know its high) - thats a 0.09 difference - so based on that span, i could test 0.00 or 0.09 - I feel thats way to broad.

Only thing I can think of is that I didn't get all the powder in one of the times or at most there was a 1mL difference.

I usually fill both vials with SW and add the powder to one and start shaking while the other vial is used to zero the meter, etc. I make sure to try and get the vials as clean as possible before placing them into the checker.

I think the issue is slightly different amounts of powder added...? I do my best to get all of it in the vial but thats easier said than done ...

Any experiences / suggestions?
 
I used to do the same as you,and was getting different results too. I got a reply from Hanna some time ago to only use the same vial for testing, as the clarity of glass could be different from vial to vial.
 
get a low range ppb one

ppb...?

I used to do the same as you,and was getting different results too. I got a reply from Hanna some time ago to only use the same vial for testing, as the clarity of glass could be different from vial to vial.

Ahh gotcha, maybe thats it... then you gotta be really fast since your suppose to shake for 2:00 mins, which barely leaves you time to add the powder (without missing) before the checker turns itself off.
 
just stop treating when you get consistanly 0.00. i have one and i quit testing, i just dose as much vinegar in my tank as i can without growing booger bacteria.
 
just stop treating when you get consistanly 0.00. i have one and i quit testing, i just dose as much vinegar in my tank as i can without growing booger bacteria.

Maybe be alil while still i get it down ... plus w/ my stock i dont want 0.00 lol but i dont want to drop its 0.30 overnight either.
 
Back
Top