Apex Temp probe going crazy

Kamreefer

Kamreefer

New member
I transfered my apex yo my new stand and thats when the problems started........My temp probe jumps back and forth in readings ive tried everything no stable reading....i read somewhere that there can be an interference in the reading with other controllers . So find out my Vortech is making it act erradic any ideas of what to do?


Sent from my iPhone using Tapatalk
 
I'm following along. I did a water change about 2 weeks ago and then my temp started going up and up.
 
Try to restart in Net Setup...May help but I am not sure....
Or may try calibrate the temp probe...
 
maidia said:
Try to restart in Net Setup...May help but I am not sure....
Or may try calibrate the temp probe...
Click to expand...

I did a reboot ...nothing. I tried to calibrate and then it would change on me as i tried changing it


Sent from my iPhone using Tapatalk
 
Whatever u do make sure your heater is unplugged. I have never heard of this issue. The only issue I have heard of in regards to making proves act wacky is related to salinity probe where salinity wire needs to be isolated from electrical interference


Sent from my iPhone using Tapatalk
 
Rcunning8 said:
Whatever u do make sure your heater is unplugged. I have never heard of this issue. The only issue I have heard of in regards to making proves act wacky is related to salinity probe where salinity wire needs to be isolated from electrical interference


Sent from my iPhone using Tapatalk
Click to expand...

the thing is the temp reading only jumpsfrom 75-77 which is what its set for ?


Sent from my iPhone using Tapatalk
 
I dint have apex so im no help only issue i ever saw with a temp probe was one time i had probe in the tank it self and coraline grew on it made it not read right temp never heard of otger equipment causeing temp probe issues . But again i never had a apex
 
Kamreefer said:
I transfered my apex yo my new stand and thats when the problems started........My temp probe jumps back and forth in readings ive tried everything no stable reading....i read somewhere that there can be an interference in the reading with other controllers . So find out my Vortech is making it act erradic any ideas of what to do?


Sent from my iPhone using Tapatalk
Click to expand...

I've only had an apex for a few months, but I've heard the probes are really sensitive to currents. So if you have anything between the controller, and the probe that could be producing a current..it may be the issue.
 
b14d6ad18f0b1691ca3ef4833336cbfe.jpg



Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top