Unlevel aquarium stand

[Kamreefer]

Im ready to setup my 120 so I️ got the tank up on the stand. When I️ went to check if it was level, I️ discovered across it is level but from front to back it’s off on both sides as well as the middle. I️ placed shims under the front and it seems as though they are just going in real easy.

Sent from my iPhone using Tapatalk Pro

 

[Mjl714]

How’s the floor? That pretty close to level.

 

[conchman]

Looks like you might be resting on the tack strip. I always keep mine 4" at least off the wall to avoid this. And if I ever need to add, something. Pipe work, HOB filter etc. I have the space.

 

[Kamreefer]

Well I have solved the issue. Now I ran in to another issue. there a gap between the the middle on the side of the tank. The corners are all resting on the stand. Just that one section has a gap. I purchased a sheet of 3/4” plywood and placed it on top. Question is what do I place between the gap and the plywood?


Sent from my iPhone using Tapatalk Pro

 

[conchman]

I wood use wood shims if the gap is between the plywood and stand. How big is the gap?

 

[Kamreefer]

Id say maybe 1/8


Sent from my iPhone using Tapatalk Pro