Wayne Scott
New member
Hello All,
I am new to this forum.
This is what my Salt Water System will consist of ( no livestock or coral listed):
1) Show Tank:
180gal custom built Marineland Perfecto Starphire glass aquarium with the overflow panels centered on the sides.
2) Pumps:
1. (Main) External Return Pump: Little Giant - TE-5.5-MDQ-SC Inline Pump 2250 GPH
2. Misc Pumps: (2) Mag 12 Pumps connected to reactors,
3. (4) Rena Pumps (all rated >1000GPH)
3) Controller:
4. Reef Keeper Elite with SL1 & SL2 and Net Module
5. Profilux II controller w/ 2-Simu L light Bars
6. Pin Point PH Monitor w/ PH Probe
4) Temperature Controls:
1. Chiller_In-Line: 2HP Arctica Titanium Chiller model DA-2000B
2. Heater Temp Controller: Finnex Temp Controller
3. Heaters: (1) 300 watt titanium heater, (1) 500watt Titanium Heater
4. (2) Fluval 300watt Digital Heaters
5) Lighting:
1. T5/MH HQI Combo Series, 72 inch 3 x 250MH + 8 x 39W T5 – 453nm & actinics,
2. MoonVue 45” LED strip
3. 1-400w Metal Halide on 300gallon Sump
4. 1- 36” Fixture: 4_T-5 actinics & 10,000K on 56gal frag tank
6) PowerHeads:
1. (4) HYDOR Koralia Evolution 4/1450GPH for 180 gal show tank
2. (3) HYDOR Koralia NANOs for 56gal frag tank
7) Reactors/Media Canisters:
1. Calcium Reactor: AE Tech CR600 CR-AET-CR600
- PH Controller: Pin Point PH Controller
- CO2 Auto Solenoid
- CO2 Canister
2. Kalk Reactor: Precision Marine
3. Nitrate Reactor: NEXTREEF MR1 Substrate Reactor
4. Aqua Medic Media Reactor (Phosphate Removal)
5. 36” Tall Media Chamber w/ Pura multi removal media
6. Fluval FX5 Canister filled with carbon / used for polishing
8) Ozone Setup:
1. Red Sea 100mg/hr W/ Neptune Labs ORP Probe
2. Oxygen Generator: Airsep AS-12 (supplies dry 99.97% Oxygen to Ozone generator inlet: aids Ozone Generator ORP efficiency)
9) Protein Skimmers:
1. Protien Skimmer: ASM G-5 Protein Skimmer PS-ASM-G5 (950GPH)
2. Protien Skimmer: ASM G-6 Protein Skimmer PS-ASM-G6 (1900GPH)
10) Filter Bags (3):
1. First Stage (65 Gallon Refugium)
2. Second Stage (90 Gallon Clarifier)
3. Third Stage (300 Gallon Surge Tank)
11) Tanks for Filtration & Propagation:
1. 65 gallon Acrylic Refugium (1st Stage)
2. 90 gallon Clarifying Sump (2nd Stage)
3. 300 gallon Sump w/ pond liner (3rd Stage)
4. 56 gallon Frag Tank w/ built-in overflows
12) Substrates:
a. ~220 LB live rock covered in coralline algae (in show tank)
b. ~600 LB live rock covered in coralline Algae (in 300gal sump)
c. ~200 LB crushed coral (in 300gal sump)
d. ~350 LB live sand (in 65 gal refugium & Show tank)
I am always looking for some SPS that has unique characteristics to add to my reef tank. I do not expect a deal, I just want to create the ultimate reef.
Please contact me if you have some cool corals that you would be willing to sell some clippings from.
Wayne
I am new to this forum.
This is what my Salt Water System will consist of ( no livestock or coral listed):
1) Show Tank:
180gal custom built Marineland Perfecto Starphire glass aquarium with the overflow panels centered on the sides.
2) Pumps:
1. (Main) External Return Pump: Little Giant - TE-5.5-MDQ-SC Inline Pump 2250 GPH
2. Misc Pumps: (2) Mag 12 Pumps connected to reactors,
3. (4) Rena Pumps (all rated >1000GPH)
3) Controller:
4. Reef Keeper Elite with SL1 & SL2 and Net Module
5. Profilux II controller w/ 2-Simu L light Bars
6. Pin Point PH Monitor w/ PH Probe
4) Temperature Controls:
1. Chiller_In-Line: 2HP Arctica Titanium Chiller model DA-2000B
2. Heater Temp Controller: Finnex Temp Controller
3. Heaters: (1) 300 watt titanium heater, (1) 500watt Titanium Heater
4. (2) Fluval 300watt Digital Heaters
5) Lighting:
1. T5/MH HQI Combo Series, 72 inch 3 x 250MH + 8 x 39W T5 – 453nm & actinics,
2. MoonVue 45” LED strip
3. 1-400w Metal Halide on 300gallon Sump
4. 1- 36” Fixture: 4_T-5 actinics & 10,000K on 56gal frag tank
6) PowerHeads:
1. (4) HYDOR Koralia Evolution 4/1450GPH for 180 gal show tank
2. (3) HYDOR Koralia NANOs for 56gal frag tank
7) Reactors/Media Canisters:
1. Calcium Reactor: AE Tech CR600 CR-AET-CR600
- PH Controller: Pin Point PH Controller
- CO2 Auto Solenoid
- CO2 Canister
2. Kalk Reactor: Precision Marine
3. Nitrate Reactor: NEXTREEF MR1 Substrate Reactor
4. Aqua Medic Media Reactor (Phosphate Removal)
5. 36” Tall Media Chamber w/ Pura multi removal media
6. Fluval FX5 Canister filled with carbon / used for polishing
8) Ozone Setup:
1. Red Sea 100mg/hr W/ Neptune Labs ORP Probe
2. Oxygen Generator: Airsep AS-12 (supplies dry 99.97% Oxygen to Ozone generator inlet: aids Ozone Generator ORP efficiency)
9) Protein Skimmers:
1. Protien Skimmer: ASM G-5 Protein Skimmer PS-ASM-G5 (950GPH)
2. Protien Skimmer: ASM G-6 Protein Skimmer PS-ASM-G6 (1900GPH)
10) Filter Bags (3):
1. First Stage (65 Gallon Refugium)
2. Second Stage (90 Gallon Clarifier)
3. Third Stage (300 Gallon Surge Tank)
11) Tanks for Filtration & Propagation:
1. 65 gallon Acrylic Refugium (1st Stage)
2. 90 gallon Clarifying Sump (2nd Stage)
3. 300 gallon Sump w/ pond liner (3rd Stage)
4. 56 gallon Frag Tank w/ built-in overflows
12) Substrates:
a. ~220 LB live rock covered in coralline algae (in show tank)
b. ~600 LB live rock covered in coralline Algae (in 300gal sump)
c. ~200 LB crushed coral (in 300gal sump)
d. ~350 LB live sand (in 65 gal refugium & Show tank)
I am always looking for some SPS that has unique characteristics to add to my reef tank. I do not expect a deal, I just want to create the ultimate reef.
Please contact me if you have some cool corals that you would be willing to sell some clippings from.
Wayne