JVC's JBJ 12 "Budget" Build

I'm kind of a picture whore... I snapped some more with the 18-55 kit lens to get a bit up closer.

_MG_7968.jpg


_MG_7975.jpg


_MG_7982.jpg


_MG_7993.jpg


don't mind the christmas tree in the background, haha
_MG_7984.jpg


and then I have a question here...

I had a larger hammer in the middle of the tank which I believe "stung" this ricordea, ever since then it shriveled up and now has left this red goo stuff where it used to be... tried searching a bit to figure out what the goo is but I couldn't find anything...

_MG_7976.jpg


Thanks for looking!
-John

oh... and a FTS

_MG_8002.jpg


Man... I need to scrape some of that algae off the front glass... my eyes aren't good enough to tell its there but pictures show otherwise. :(
 
to me it looks like cyano algae... You should probably siphon it out.. And regarding the ricordea probably move it away frm the hammer..hope this helps..

jeff
 
I'm gonna syphon it out tonight when I get home from class. I might move the ricordea but its glued down and I wouldn't be devastated if it died.
 
jeppun21 said:
how's ur clowns doing by the way? I'm getting mine tmmrw :)
Click to expand...

Clowns are doing GREAT! They love their tank.

Update, threw back in the powerhead until I upgrade my return pump since the hydorflo on the stock DX pump was creating dead areas of flow and I didn't want that.

Also tried some chemiclean that I got recommended by Steve at Fish Planet... seems to be helping the scenario quite a bit!

FTS
_MG_8023.jpg


Duncans
_MG_8006.jpg


Homemade frag rack with my Grow out Paly, Some Zoos from Fishbeard, and a small kenya tree frag I made
_MG_8011.jpg


Going to move this into the center to replace the old big hammer in the next few days or so! Thanks again Fishbeard!
_MG_8007.jpg


Galaxia... I love this coral, those tentacles look sooo good.
_MG_8017.jpg


Clowns all happy and such
_MG_8028.jpg


Last of the cyano on that back top rock
_MG_8025.jpg


Behind those corals you can see a rock I made that has some zoas that I've found around the tank, some reddish/purple ones, dark green, light green and yellow ones!
_MG_8018.jpg
 
Looking good Bro.. Glad u got the cyano all taken care of.. Clowns are looking awesome :). Got mine last week frm blake.. Its sweet..
 
Jvc got a question for u. I recently aquired a 12 jbj nano.. Do u thnk a 900 maxijett would be good for the flow in chamber one.. And how did u make ur frag rack on the back?

Thnks
Jeff
 
jeppun21 said:
Jvc got a question for u. I recently aquired a 12 jbj nano.. Do u thnk a 900 maxijett would be good for the flow in chamber one.. And how did u make ur frag rack on the back?

Thnks
Jeff
Click to expand...

Is it a DX or a regular 12?. If it's a DX then you can fit a 1200 in the last chamber which is what Brad (rattyE36) has and I would recommend, but that's because the DX has 3 chambers, where as the stock NC12 has 4 chambers so the last chamber is smaller and I think a 900 is as big as you can fit, I haven't determined that yet but that's my guess on what will fit. I'd say it will be enough flow with a 900 but if you can do a 1200 that would be more ideal.

jeppun21 said:
Looking good Bro.. Glad u got the cyano all taken care of.. Clowns are looking awesome :). Got mine last week frm blake.. Its sweet..
Click to expand...

Thanks man! I saw the one you got, I was in there the day Blake brought it in, looks awesome!
 
Well i the one i have has three chambers so i gues its the DX version.. I only have the maxijett 900 i'll test it out.. Do u thnk adding a hydor nano 240 would make too much flow?



Haha thnks bro.. U inspired me to get one of blakes clowns.. Im very glad that it paired up nicely with my other clown
 
jeppun21 said:
Well i the one i have has three chambers so i gues its the DX version.. I only have the maxijett 900 i'll test it out.. Do u thnk adding a hydor nano 240 would make too much flow?



Haha thnks bro.. U inspired me to get one of blakes clowns.. Im very glad that it paired up nicely with my other clown
Click to expand...

These clowns are top notch! I think a maxijet 900 might be enough, if not a 1200 should be plenty and you could always throw the power head in, but personally if you can avoid the powerhead, then don't use it, it looks ugly in the tank and if a bigger pump will give enough flow go with that then.
 
JVC said:
Is it a DX or a regular 12?. If it's a DX then you can fit a 1200 in the last chamber which is what Brad (rattyE36) has and I would recommend, but that's because the DX has 3 chambers, where as the stock NC12 has 4 chambers so the last chamber is smaller and I think a 900 is as big as you can fit, I haven't determined that yet but that's my guess on what will fit. I'd say it will be enough flow with a 900 but if you can do a 1200 that would be more ideal.



Thanks man! I saw the one you got, I was in there the day Blake brought it in, looks awesome!
Click to expand...


FYI I have an MJ900 not 1200.....
 
Red Slime Algae is gone for now! (there are some stains left from it but it's 98% done)

_MG_8039.jpg


YWG Found a new home
_MG_8038.jpg


Moved some zoas around.
_MG_8036.jpg


FTS
_MG_8030.jpg


I should be done picture whoring for now!
-John
 
Tank has been pretty much on cruise control. Added this little buddy today!

ba0d6381.jpg


1c30b413.jpg


and he instantly went under the GSP and has not re-appeared.

afb505e5.jpg


Fighting some hair algae after I left town for 5 days and told my dad to feed the fish twice, I figure he threw in tons of dry food opposed to the like 5 pellets I normally put in and watch them eat. Keeping up with my water changes and everything should be back to normal in no time!
 
You need to add one of those 4x 1w royal blue LED kits from RapidLED to supplement your actinic, you will be AMAZED at the colors you will get out of all those corals. That euphyllia you got from me looks so totally different in your tank, and im sure its the lighting cause I have a piece in my 14g under the PC lights with my frogfish and it looks just like in your pics.
 
FishBeard said:
You need to add one of those 4x 1w royal blue LED kits from RapidLED to supplement your actinic, you will be AMAZED at the colors you will get out of all those corals. That euphyllia you got from me looks so totally different in your tank, and im sure its the lighting cause I have a piece in my 14g under the PC lights with my frogfish and it looks just like in your pics.
Click to expand...

Yeah I might have to do that. I had some cheapie led strips I got that I've been meaning to install. Might do that tomorrow if the weather is shitty.
 
He's supposedly a fiddler crab but no one at MCF was totally sure. I just thought it was unique and I don't have any emeralds anymore.
 
You must log in or register to reply here.
Back
Top